Following the deprecation of IPSec in favour of better protocols like OpenVPN from various vpn providers, I have recently had to move away from Mikrotik as the firewall solution of choice. A couple of years back I had used Opnsense for one of my clients, and was quite impressed with the capabilities and performance of the software, however, having another full blown pc, running 24 x 7 in the house was something that always held me back from using it …
Tag: arduino
In part one of this blog post, we dealt with download of the marlin firmware, along with the configuration of the Arduino IDE to be able to compile it. In this second part we will deal with configuration of the marlin firmware for our printer, along with another of necessary configuration changes to the IDE which will enable us to upload the firmware to our GT2560 board. The next part assumes that your GT2560 board has got bootloader installed, and …
Before we begin, assuming your printer is working correctly, I would recommend buying a second control board identical to the one inside your printer, so if things go south, you can always fall back to the original board. My printer came with a GT 2560 Rev A board, (without a bootloader, but more on this later), so I got a second one off amazon, including a full graphics display for around 40 bucks. Luckily the board received came with a …
Social Profiles